manualshive.com logo in svg

Cabletron Systems MMAC-Plus 9T125-08, Reference Manual, Page: 23 / 36

Share
Download
Cabletron Systems MMAC-Plus 9T125-08 Reference Manual Download Page 23

21

9T125-08 Module Specific Information

Figure 7. Token Ring Secured Station Configuration Screen

                         SmartSwitch 9000  Local Management

                   Token Ring Secured Station Configuration

    Module Name: 9T125-08                        Firmware Revision: 01_00_00

    Slot Number: 10                              BOOTPROM Revision: 01.00.05

                                    Token Ring #1

                          Entry    Station Address

                           001    00-00-B8-74-40-06

                           002    00-00-B8-74-40-7A

   Stn Edit 00-00-00-00-00-00      [ ADD ]      Security Mode [  Disabled  ]

                                [TOKEN RING 1]      [  9-16 ]

       EXIT                                                          RETURN

Up to 8 station addresses appear on the screen. If additional station addresses 
exist, a command containing the range of station addresses, such as [ 9-16 ], 
appears on the command line (bottom of the screen). To view any additional 
station addresses, highlight the range of station addresses command, then press 
the 

Return

 key.

NOTE

Summary of Contents for MMAC-Plus 9T125-08





































Reviews:

No comments