9A128-01 and 9A129-01 Module Specific Information
10
Modifying an Existing PVC
To modify a PVC:
1. Go to the ATM Connection Add/Delete Entry Screen.
2. Use the arrow keys to move the cursor to the VPI field.
3. Enter the number of the VPI you want to modify and then press the
Tab
key.
4. Enter the number of the VCI you want to modify and then press the
Tab
key.
5. Press the
Space
Bar
to select the AAL type.
6. Press the Tab key.
7. Press the Space Bar to select the Encapsulation Type.
8. Use the arrow keys to highlight ADD/MODIFY, then press the Return key.
After you press the Return key, two (2) messages are displayed in the upper left
hand corner of the screen: “ENTRY DELETED” and then “ENTRY ADDED”.
NOTE
