Installing the MicroMMAC
MicroMMAC Installation Guide
Page 3-15
To stack SEH non-intelligent hubs together, perform the following steps:
1. Attach the SEH HubSTACK Interconnect cable to the OUT port on
the rear panel of the SEH as shown in Figure 3-11.
2. Attach the other end of the SEH HubSTACK Interconnect cable to the
IN port on the rear panel of the SEH next in the stack.
Figure 3-11
Stacking the MicroMMAC
SEH HubSTACK
INTERCONNECT CABLES (PN 9380110)
MicroMMAC HubSTACK
INTERCONNECT CABLE (PN 9380111)
MicroMMAC-34E
10BASE-T
HUB
WITH
LANVIEW®
LINE:
100-125V - 4.0A
200-250V - 2.0A
50/60Hz
SN
SEH INTERCONNECT
OUT
SEH INTERCONNECT
HubSTACK
10BASE-T
HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
HubSTACK
10BASE-T
HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
HubSTACK
10BASE-T
HUB
WITH
LANVIEW®
SEH-24
OUT
IN
SEH INTERCONNECT
HubSTACK
10BASE-T
HUB
WITH
LANVIEW®
SEH-24
OUT
IN
090805
