Chapter 4: Local Management
Page 4-22
IRM3 User’s Guide
3. Using the arrow keys, highlight the SAVE SETUP option at the
bottom of the Setup screen.
4. Press RETURN. The message “Modified screen Information Has
Been Saved!” appears on the screen.
4.6.7 Setting the Set Refresh Time Option
To set the Set Refresh Time option perform the follosing steps:
1. Using the arrow keys, highlight the Set Refresh Time field.
2. Enter the refresh time. The valid range is from 2 to 99 seconds.
3. Press RETURN. If an illegal value was entered, the error message
“Illegal Information Entered” appears on the screen.
4. Using the arrow keys, highlight the SAVE SETUP option at the
bottom of the Setup screen.
5. Press RETURN. The message “Modified screen Information Has
Been Saved!” appears on the screen.
4.7 PORT ASSOCIATION SCREEN
The Port Association option allows you to set which of the IRM3 ports,
the AUI port or Fiber Optic Link port, acts as the repeater port. The
following sections describe the Port Association. Each field is described
in detail, and instructions are given on setting the repeater port.
4.7.1 Accessing the Port Association Option
To access the Port Association Option, perform the following steps:
1. Using the arrow keys, highlight the PORT ASSOCIATION option at
the bottom of the IRM3 Main screen.
2. Press RETURN. The Port Association screen, Figure 4-7, appears.
NOTE
If you have just unlocked the device, you must also reenable
the boards. Refer to Section 4.4.4 for information on
enabling/disabling boards.
