Network Tools
HSIM-W87 User’s Guide
4-9
command:
ds1alarm
Syntax:
ds1alarm
ds1alarm -[ea | da] <WANID>
ds1alarm -[et | dt] <WANID>
ds1alarm -sec <WANID> <VALUE>
ds1alarm -sei <WANID> <VALUE>
ds1alarm -mr <WANID>
Description:
The ds1alarm function allows the user to set error
thresholds in order to set traps and monitor the operation
and recovery of a device.
<WANID> This option is either ALL to apply command
to all DS1 circuits, or the specific WAN physical identifier
associated with the DS1 circuit.
Options:
ds1alarm (with no options) displays information on the
error thresholds.
-ea enables the WAN DS1 Alarms Admin.
-da disables the WAN DS1 Alarms Admin.
-et enables the WAN DS1 Alarms Traps Feature.
-dt disables the WAN DS1 Alarms Traps Feature.
-sec sets the Errored Seconds Threshold Count to
VALUE.
-sei sets the Errored Seconds Threshold Interval to
VALUE.
-mr manually recovers a DS1 link that has exceeded a
threshold.
Example:
-> ds1alarm
2689_2
#--------------------------------------------------------------------------------------------------------------------------
#
DS1
Alarm
Thresholds
#--------------------------------------------------------------------------------------------------------------------------
# HSIM
DS1
DS1
Admin
Trap
ES
ES
# ID
Index
ID
Status
Admin
Count
Interval
#
(minutes)
#--------------------------------------------------------------------------------------------------------------------------
# 1
1
29
Disabled
Enabled
100
6
# 1
2
30
Disabled
Enabled
100
6
# 1
3
31
Disabled
Enabled
100
6
# 1
4
32
Disabled
Enabled
100
6
# 1
5
33
Disabled
Enabled
100
6
# 1
6
34
Disabled
Enabled
100
6
# 1
7
35
Disabled
Enabled
100
6
----More----