background image

9031754 E4

i

Notice

Cabletron Systems reserves the right to make changes in specifications and other information 
contained in this document without prior notice. The reader should in all cases consult Cabletron 
Systems to determine whether any such changes have been made.

The hardware, firmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, 
INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT 
NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR 
THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN 
ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH 
DAMAGES.

Virus Disclaimer

Cabletron has tested its software with current virus checking technologies. However, because no 
anti-virus system is 100% reliable, we strongly caution you to write protect and then verify that 
the Licensed Software, prior to installing it, is virus-free with an anti-virus system in which you 
have confidence.

Cabletron Systems makes no representations or warranties to the effect that the Licensed 
Software is virus-free.

Copyright © January, 1997, by Cabletron Systems, Inc. All rights reserved.

Printed in the United States of America.

Order Number: 9031754 E4

Cabletron Systems, Inc.
P.O. Box 5005
Rochester, NH 03866-5005

SPECTRUM, the SPECTRUM IMT/VNM logo, DCMIMT, and VNM are registered 
trademarks, and SpectroGRAPHSpectroSERVERInductive Modeling Technology
Device Communications Manager, and Virtual Network Machine are trademarks of 
Cabletron Systems, Inc.

C++ is a trademark of American Telephone and Telegraph, Inc.
UNIX is a trademark of UNIX System Laboratories, Inc.
OSF/Motif and Motif are trademarks of the Open Software Foundation, Inc.
X Window System is a trademark of X Consortium, Inc.
Ethernet is a trademark of Xerox Corporation.

Summary of Contents for Device Management Module Dec GigaSwitch


































































Reviews: