Cabletron Systems DELHE-UA, User Manual, Page: 28 / 50

Chapter 2: Installation
2-4 DELHE-UA User’s Guide
Figure 2-2 Installing the FEPIM
4. Press down firmly on the FEPIM until the pins slide all the way into
the DELHE-UA connector. Ensure that the FEPIM seats flush on the
standoffs.
5. Secure the FEPIM using the screws enclosed in the FEPIM packaging.
The screw used to attach the rear of the FEPIM to the standoff is
optional and not necessary for proper installation. Refer to Figure 2-2.
If SC protective covers were removed from a fiber FEPIM,
replace the covers until the port is connected to the network to
reduce the chance of dust and contaminants entering the port.
DELFX-UI
10
100
Front
Standoffs
Rear
Standoff
Module
DELHE-UA
Connector
Module
Connector
DELHE-UA
feinstall