QUICK START
30 CyberSWITCH
2.
Disable TFTP Server.
Disable through Dynamic Management’s manage mode. This will secure important device
information. Device information must be secure to prevent unauthorized access to the
CyberSWITCH. To disable this access, enter the following command at the manage mode
prompt:
tftp change
Then follow the on-screen instructions to disable the TFTP feature.
3.
Change the admin and guest system passwords.
If your system was previously accessed by your distributor, the preconfigured password will
be admin (in lower case). Change this password to secure your system. To make this change,
enter the following command at the system prompt:
pswd
Then follow the prompts to enter a new password. Your password must be a 3 to 16 nonblank
character string. Be careful, passwords are uppercase and lowercase sensitive.
R
ETURN
C
ONFIGURATION
TO
F
ACTORY
D
EFAULTS
The default configuration files are located on the CSX150 Documentation and Set-Up Utility CD. If
you wish to return to the default configuration, download the
DEFLTCFG.OSW
file. Follow the
same steps for Local or Remote Upgrade except you download the file
DEFLTCFG.OSW
instead of
the
UPGRADE.OSW
file.
I
NITIAL
I
NSTALLATION
S
TEPS
There are initial configuration steps you must complete (regardless of remote device connections).
We outline these steps in the following sections.
B
EGINNING
THE
C
ONFIGURATION
P
ROCESS
1.
When you power on your system, the CyberSWITCH program automatically starts. Enter your
log-in id (
admin
)
. Next, enter a password.
2.
Start up the configuration editor, CFGEDIT; at the system prompt, type:
cfgedit
Note:
If you are unsure of any configuration values, use the defaults.
Use the displayed CFGEDIT menu to complete the remaining configuration steps.
