Cabletron Systems CSX100 series, User Manual, Page: 80 / 153

ISDN Router 66
BRIDGING AND ROUTING CONTROLS
Configuration
Section
Item Setting
Bridging / Routing
Default Remote for all dial outs
TCP/IP Routing On/Off
IPX Routing On/Off
Internet Firewall On/Off
HQ
On
On
On
Names and Passwords Example
In the sample configuration provided, the small office SOHO communicates
with the central site HQ and the Internet Service Provider ISP.
System Passwords
SOHO has a system password ‘SOHOpasswd’. This password is used
when SOHO dials out to site HQ for authentication by that site, and at
any time when HQ challenges SOHO.
HQ has a system password ‘HQpasswd’ which is, likewise, used when
HQ dials out to site SOHO for authentication by SOHO, and at any time
SOHO challenges HQ.
ISP has a system password ‘ISPpasswd’ used for the same purpose.
Remote Passwords
Each router has a remote router’s password for each remote router
defined in its Remote Router Database. The router will use the remote
password to authenticate the remote site when the remote router dials in
or is challenged by the local site.
For example, SOHO has remote router entries for HQ and ISP, and
defined in each entry are the respective remote router’s password.
The following table shows the names and passwords for each router that
must be defined for authentication to be performed correctly. (This
assumes that all three systems use some form of authentication protocol.)