4-4
CRBRIM-W/E
CHAPTER 4: Installation
Figure 4-1. Installing the CRBRIM-W/E
4.2.2 Installing the EPIM-3PS
To install the EPIM-3PS into a Media Interface Module (MIM):
1.) remove the mounting screw shown in Figure 4-2.
2.) Remove the coverplate or the EPIM (whichever applies).
3.) Slide the EPIM-3PS into place, insure that the EPIM connectors are
fully engaged with the MIM connectors.
4.) Reinstall the mounting screw.
RESET
TP
LAN
PWR
SYS
RESET
S1
S0
CONSOLE
S1
S0
When removing an EPIM, be sure to pull the module straight out to
prevent damage to the connector.
NOTE
Summary of Contents for CRBRIM-W/E
Page 1: ...CRBRIM W E USER S GUIDE ...
