Chapter 5: Local Management
5-40
6H122-16 User’s Guide
5.15
GENERAL CONFIGURATION SCREEN
The General Configuration screen,
Figure 5-18
, allows the user to set the
system date and time, IP address and subnet mask, the default gateway,
the TFTP Gateway IP address, the Operational Mode, the Management
Mode, and the COM port configuration. The General Configuration
screen also allows the user to Clear NVRAM, and enable or disable IP
Fragmentation.
To access the General Configuration screen from the Module
Configuration Menu screen, use the arrow keys to highlight the
GENERAL CONFIGURATION menu item and press ENTER. The
General Configuration screen displays.
Figure 5-18
General Configuration Screen
The following briefly explains each General Configuration screen field:
MAC Address (Read-Only)
Displays the base physical address of the module.
Firmware Revision: XX.XX.XX
General Configuration
BOOTPROM Revision: XX.XX.XX
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Module Date:
Module Time:
Screen Refresh Time:
Screen Lockout Time:
Com: [ENABLED] Application: [LM]
Clear NVRAM [NO]
Module Uptime XX D XX H XX M
Module Type: 6H122-16
Slot Number:
X
IP Fragmentation [ENABLED]
Operational Mode: [802.1D SWITCHING]
Management Mode: [DISTRIBUTED]
2361_16
00-00-ID-00-00-00
0.0.0.0
255.255.0.0
NONE DEFINED
0.0.0.0
6C105 LOCAL MANAGEMENT
Event Message Line
RETURN
SAVE
02/03/1998
14:23:00
30 sec.
15 min.
EXIT
