Cabletech URZ0198, Owner'S Manual

Page: 37 / 76

37
Owner’s manual
EN
12. TROUBLESHOOTING
In some region, the digital terrestrial signal may be weak. So you’d
better use the antenna in which the booster was built, for watching
the weak signal channels.
Problem Possible cause What to do
Standby light not lit Mains lead unplugged Check mains lead
No signal found Aerial is disconnected
Aerial is damaged/
misaligned
Out of digital signal
area
Check aerial lead
Check aerial
Check with dealer
No picture or sound Scart/AV is not selected
on your TV
Reduce to another
channel
Scrambled channel
message
Channel is scrambled Select alternative
channel
No response to
remote control
Receiver off
Handset not aimed
correctly
Front panel obstructed
Hand set batteries
exhausted
Plug in and turn on
plug Aim handset at
front panel
Check for obstructions
Replace handset bat -
teries
The remote control
will not operate
your STB
(1) The batteries in
your remote control
need replacing
(2) There is an obstruc -
tion blocking the signal
path between the
remote control and
the box
(1) Replace the bat -
teries
(2) Check that there is
nothing in the way of
the path between the
remote control and the
receiver
After moving the
STB to another
room you find you
are no longer able
to receive digital
reception
The aerial feed former
new point may come
through a distribution
system which may
reduce the digital signal
now received by the
box.
Try a direct feed from
the antenna