Cabletech URZ0198, Owner'S Manual

Page: 29 / 76

29
Owner’s manual
EN
This menu allows you to re-set the STB back to factory settings,
clear all existed channels.
1. In „System „ menu, select „Restore Factory Default” and press
„OK” button, you are asked to input password (the default pas -
sword is”000000”).
2. After inputting the correct password by pressing numeric but -
tons, press „OK” button to restore factory default. Press „EXIT” to
cancel.
9.4 Restore factory default
This menu can display some information of Model, SW Version
and HWVersion in this STB.
9.5 Information