the size,Measurement, weight of the metal excluded the coin, key, jewelry, belt
buckle in case false alarm. For the place where need to prevent losing the precious
metal materials, such as industrial and mining enterprises, bank, private mansion
etc, and the place where need to prevent the carrying of dangerous goods, such as
Airport, prisons, customs and exhibition hall, it’ll be your wise choice for installing
the SUNLEADER walkthrough metal detector.
2
【
WARRANTY CARD
】
1. Please keep this card with reasonableness, and show it when maintaining
it.
2 . This card will be invalid if without the signature or stamp of the
designated dealer.
3 . This card will be regarded as invalid if it has not been filled in details
three guarantees and acknowledgment of receipt, please confirm whether
the data filled in the three guarantees and acknowledgment of receipt is
correct or not when purchasing it, and then hand it over to the dealer.
4. This card will not be supplied again if losing it.
Product type
Product number
Date acquisition
User(Liaison)
Post code
Address
User’s phone number
Fax
Date of maintenance
Record of maintenance
Maintainer
11
【
BRIEF MAINTENANCE
】
1. Can’t Start The Machine
1) Check whether power sockets properly.
2) Check whether the power switch is on.
3) Check the fuse blew out (Only for XLD-A model).
2. Can’t Account Passengers
1) Don’t work in the strong sunlight as it use infrared sensor.
2) Check the left and right infrared sensor probe whether in parallel.
3. Alarm Without Metal
1) First, exclude all the metal in ourself and go through the detector. Find out which zones alarm and
low down the zone sensitivity accordingly until it is not alarm.
2) Check whether have interference nearby such as big movable machine, high-power equipment.
3) Check whether there are similar products nearby, if so change the frequency(Original frequency
show on the package carton box).
4) Make sure no big wind and smooth around installation place.
4. With Metal But No Alarm
1) Follow the user manual and increase the zone sensitivity and total sensitivity.
2) The factory default setting can detect a coin diameter 25mm. Make sure the metal size is bigger,if not
adjust the sensitivity accordingly.
5.Single Zone No Alarm
Make higher sensitivity then test again.Change the corresponding zone signal collection card if problem
is the same in highest sensitivity.
