2. Standby Screen
Compass Heading (SLR 600 Only):
See reverse side of this manual for information on how to calibrate
your compass.
City/Highway Indicator:
Shows curent fi ltering mode. See reverse side of this manual for
more information.
Vehicle Battery Voltage:
Displays your car battery voltage and automatically warns you if
this drops below 11.9V.
IntelliMute Indicator:
See reverse of this manual.
Operating Instructions
b. Dash Mounting
For dash mounting, use the enclosed hook & loop fastener
with double-sided tape. Simply attach it to the bottom of the
unit with display in fl ip-up position.
Touch-Point Controls
Appropriate touch-point icons will light up automatically to
show you available options. Touch the touch-point icons to
activate corresponding function.
Touching
Volume
touch-point while receiving an alert
will mute the audible alert. Touching
Display Brightness
touch-point will turn off the display.
Models SLR 500/600
Supercharged Long-Range
Radar/Laser Detectors
Printed in China Part No. 480-767-P Version A
NOTE:
These devices complies with part 15 of FCC rules: Operation is subject
to the following two conditions: (1) These devices may not cause harmful
interference, and (2) These devices must accept any interference received
including interference that may cause undesired operation.
CAUTION:
Modifi cations or parts not approved by Cobra Electronics
Corporation may violate FCC Rules and void authority to operate this equipment.
Types of Screens
1. Menu/Settings Screen
User Settings:
For customizing settings for IntelliMute, Auto Mute, Voice/Tone
Alerts, Color Themes (SLR 600), Smart Power, Compass (SLR 600)
and Reset to Factory Default.
Alert Settings:
For customizing settings to turn on/off certain individual radar
bands and Low Car Battery Warning.
Navigate through
Settings
using the scroll touch-point.
Press
Select
to confi rm and
Menu
to save and exit.
3. Radar/Laser Alert Screen
Radar bands consist of X-band, K-band, Ka-band, and Ku-band.
With Radar signals, the signal strength meter shows signal strength
of the radar gun as well as relative proximity to the source. With
Ka-band, you will also be notifi ed of the actual Ka-band radar gun
frequency being used.
With Laser signals, you will always receive full alert and pulse rate
(PPS) of the corresponding laser gun being used. Laser PPS cur-
rently in use are: 100, 125, 130, 200, 238 and 340.
Ka Band Alert
Signal Strength
Frequency
Laser
Pulse
Rate
User
Settings
Alert Settings
Volume
Display
Brightness
Right
Scroll
Left
Scroll
City/Highway
Mode
Menu/Save
& Exit
Select
Thank you for purchasing Cobra
®
Vedetta
™
Series, Model
SLR 500/
SLR 600
Radar/Laser Detector. Please familiarize yourself with the
capabilities your new detector can provide by reading this manual.
Also, please be careful when using your new detector while driving.
Powering Unit On/Off & Mounting Unit
Plug in the detector using the included cigarette lighter power cord.
Press the
Power
button momentarily to turn the unit
On
(or
Off
).
Note:
To change display orientation, press and hold the
Power
button for 2 seconds.
a. Windshield Mount
Lift lever on suction cup base before attaching to the windshield.
Once attached, push against windshield and lock the lever down.
Use the ball-joint adjustment and make sure the detector unit is
aligned level and pointing straight ahead. The display can be in
fl ip-up or fl ip-down position to suit preferred mounting location,
and rotated to face directly toward you. Renew suction cup with
a damp cloth or by rinsing under tap water.
Insert bracket
here
Attach to windshield
Power Jack
Power Button
SLR 600
SLR 500
SLR 500 standby screen shown
City/Highway
Indicator
Vehicle
Battery
Voltage
IntelliMute
Indicator
Compass
Heading
SLR 600 standby screen shown
SLR500_600_QSG.indd 1
3/2/12 1:44 PM
