cable matters 202010, User Manual

Page: 7 / 60

5
www.cablematters.com
2 Computers USB 2.0 Switch with Remote Control (2 In 4 Out)
3.3 Connection Instructions
1) Power off all source equipment
2) Make sure the switch is “ OFF ” before connecting any device
3) Optional: Connect the
USB - C charging cable
to a wall charger
4) Connect the switch box
to up to 2 USB -
equipped computers
with the provided Mini - B
to USB - A Cables
5) Connect the switch box
to up to 4 USB periph-
erals through the USB -
A ports
3.2 Remote Installation
Remove the insulating tab from the end of the battery and
check that the battery is installed correctly
Troubleshooting tips:
• Replace the battery
• Make sure the Switch is turned on and remote control is
not turned off on the Switch
•
The included remote control is already paired to the switch by default.
To manually pair a replacement remote control, power on ONLY the
switch to pair and hold down the Pair button on the remote control for 3
seconds until the remote control LED stops flashing. If multiple switch-
es are used in the same room, power off all other switches before
pairing.