10
FINAL ASSEMBLY
10. Connect both the motor and lamp power cords to a surge protected outlet, or preferably a
GFCI (Ground Fault Circuit Interrupter) outlet. While not required, a GFCI is recommended to
prevent electric shock and can be purchased at your local hardware store. Though the motor
is sealed, you must make sure to keep all electrical connections dry.
11. Attach the water pump to a surge protected power outlet. The pump has no on/off switch so
once you connect it to the power supply it will start working.
ALWAYS
UNPLUG WATER
PUMP FROM POWER SOURCE WHEN NOT IN USE.
Avoid touching the water pump in the
water bucket with the power on.
NEVER UNPLUG OR TOUCH THE POWER CORDS WITH
WET HANDS.
12. Twist the two side valves on the side spray tubes to the off position. When the black arrow
on the side valves are pointed to the left, they are in the off position.
13.
THE TWO CLEAR WHEEL SPLASH GUARDS ON THE HOODS MUST NOT BE IN CONTACT
WITH THE WHEELS.
Adjust them so that the wheels spin freely.
14. You can now turn on the machine. The wheels spin at 1800RPM. It is typical for the motor to
produce a winding sound when starting up the machine and a mild humming sound when
the machine is turned off. On some occasions, the motor may make a high pitch sound. This
is most likely caused by the space between the unit and the table surface. You can reduce
the sound by putting a cloth under the unit.
WHEN TURNING THE MACHINE OFF, THE
WHEELS COAST TO A STAND STILL.
15. Start the water drip by turning the six water control knobs on the left and right hoods to the
on position. Our unique water system allows you to drip water on each wheel individually.
You can adjust the water flow rate to your preference with the water control knobs. While in
use, make sure there is enough water dripping so that the wheels do not become dry.
NEVER RUN WHEELS DRY.
To use the side spray for the canvas pad or diamond disc, turn
the black arrow on the side valve to the right.
16. You are now ready to begin using the CabKing-6V3.
PLEASE READ THE REST OF THIS
INSTRUCTION MANUAL, ESPECIALLY THE SAFETY INSTRUCTIONS, BEFORE USE TO AVOID
RISK OF INJURY.
Important note:
If you are registering your machine (which we highly recommend), the serial
number is found on the label located on the backside of the motor and on the outside box label.
Register your CabKing using the included registration form or online at
cabking.com/register
to
receive future product information, special offers and to any facilitate warranty related requests.
