►
Instructions:
1. Place the face frame
（
A
）
face down on a flat soft working surface to ensure that the face is not scratched or damaged.
figure1
f
igure2
figure3
2.
Installing the side panels (Figure2)
: Insert the left and right panels(B) into the grooves of the face frame (A) and align
the Cam lock connectors.Lock the cam with a screwdriver by turning the screw 180
°
clock wise.
3.
Installing the bottom panel(Figure3)
:Gently spread the side panels and insert the bottom (C) into the grooves of the
side panels until it touches the face frame (A).Align it and lock each cam.
4.
Installing the back panel and Toe Kick(Figure4)
: Before you start this step,put the back panel on a falt surface facing
Upwards.Install the drawer rail holders into the predrilled holes on the back panel.The opening of the holders should be
Facing each other.Secure them with 2PCS round head screws.Then put the back panel at rear of the side panels.Align
And lock each cam lock.Installing the Toe Kick by locking the cam lock at both ends.
Figure4
5.
Installing the corner braces and assemble the parts of Drawer Box(Figure5)
6. Insert the drawer box into the cabinet
，
then Installing the corner braces (Figure6).
Figure5
Figure6
Page3
