17
4
ASSEMBLY
Assembly is easy and
requires no tools.
●
1
Loosen both Locking Collars by
rotating 100% counterclockwise.
●
2
Insert the Upper Stem into the S-Rod and click
Silver Button into hole.
●
3
Position the Lower Stem with the
Silver Button toward the back. Using
the Bolt and Knurled Knob, attach the
Search Coil to the Lower Stem.
●
4
Press the button on the upper end of
the Lower Stem and slide the Lower
Stem in to the Upper Stem.
Adjust the stem to a length that
lets you maintain a comfortable
upright posture, with your arm relaxed
at your side, and the search coil
parallel to the ground in front of
you.
●
5
Wind the cable securely
around the stems.
●
6
Insert the plug into the matching
connector on the back of the detector
body. Be sure that the key-way and
pins line up correctly.
●
7
Tighten both Locking Collars.
●
8
Secure the cable with the 2 velcro straps
provided, one on the Lower Stem close to
the coil, one on the Upper Stem, close to
the housing.
Caution:
Do not force the plug in. Excess
force will cause damage. To
disconnect the cable, pull on the
plug.
Do not pull on the cable.
Locking
Collar
S-Rod
Velcro
Strap
Velcro
Strap
Knurled
Knob
Bolt
Serch
Coil
Hand-grip
Search
Coil Cable
Cable
Plug
Locking
Collar
Upper
Stem
angles, you may have
encountered multiple objects.
If you are new to the hobby,
you may want to dig all targets
at first. With practice in the
field, you will learn to better
discern the nature of buried
objects by the nature of the
detector’s response.
You may encounter some false
signals as you proceed. False
signals occur when the detector
beeps, but no metal target is
present. False signals can be
induced by electromagnetic
interference, oxidation, or
highly mineralized ground
soils. If the detector beeps
once, but does not repeat the
signal with several additional
sweeps over the same spot,
there is probably no target
present.
When searching very trashy
ground, it is best to scan small
areas with slow, short sweeps.
You will be surprised just how
much trash metal and foil you
will find in some areas. The
trashiest areas have been
frequented by the most people,
and frequently hold the most
promise for finding the most
lost valuables.
Also maintain the search coil
positioned just above the
surface of the ground, without
making contact with the
ground. Making contact with
the ground can cause false
signals.
IN THE FIELD TECHNIQUES
(continued)
