Connections
2.1 Configuration/Stereo
7
2 Xi sp 1 Xi subwoofer
(delivered with a MAX module and 2 CINCH cables)
Connect each output of the amplifier directly to the matching
Xi speaker: “FRONT LEFT” and “FRONT RIGHT”.
Use the MAX module and one of the 2 CINCH cables for the
connection of the subwoofer. Low frequencies coming from the
2 channels of your amplifier are taken directly from the ampli-
fier with the MAX module and directed with one of the CINCH
cable to the MAX IN input of the subwoofer. For the MAX
module, cables are standardized; they can be connected to
any speaker’s outputs of the amplifier. It is absolutely necessary
to respect the polarity (+/red, - /black) while connecting 2 of
the 5 pairs of cables of the MAX in parallel with the speaker’s
cables connecting the amplifier to the Xi speakers.
Configuration 5.1
8
5 Xi sp 1 Xi subwoofer
(delivered with a MAX module and 2 CINCH cables)
Connect each output of the audio video amplifier directly to
the matching Xi speaker: “FRONT LEFT”, “FRONT RIGHT”,
“CENTRE”, “SURROUND LEFT” and “SURROUND RIGHT”.
Use the MAX module and the 2 CINCH cables for the con-
nection of the subwoofer. Low frequencies coming from the 5
channels of your audio video amplifier are taken directly from
the audio video amplifier with the MAX module and directed
with one of the CINCH cable to the MAX IN input of the sub-
woofer. For the MAX module, cables are standardized; they
can be connected to any speaker’s outputs of the amplifier. It
is absolutely necessary to respect the polarity (+/red, - /black)
while connecting the 5 pairs of cables of the MAX in parallel
with the speaker’s cables connecting the audio video amplifi-
er to the Xi speakers.
Then connect the input LFE IN of the subwoofer to the output
SUBWOOFER/LFE of the audio video amplifier using the sec-
ond CINCH cable.
Evolution from a stereo configuration
to a 5.1 configuration
9
2 Cabasse sp 3 Xi sp 1 Xi subwoofer
(delivered with a MAX module and 2 CINCH cables)
Connect each output of the audio video amplifier directly to
the matching speaker: “FRONT LEFT” and “FRONT RIGHT”
to your Cabasse speakers, “CENTRE”, “SURROUND LEFT”
and “SURROUND RIGHT” to the Xi speakers.
Use the MAX module and the 2 CINCH cables for the con-
nection of the subwoofer. Low frequencies coming from the 3
channels “CENTRE”, “SURROUND LEFT” and “SURROUND
RIGHT” of your audio video amplifier are taken directly from
the audio video amplifier with the MAX module and directed
with one of the CINCH cable to the MAX IN input of the sub-
woofer. For the MAX module, cables are standardized; they
can be connected to any speaker’s outputs of the audio video
amplifier. It is absolutely necessary to respect the polarity
(+/red, - /black) while connecting 3 of the 5 pairs of cables of
the MAX in parallel with the speaker’s cables connecting the
audio video amplifier to the Xi speakers.
Then connect the input LFE IN of the subwoofer to the output
SUBWOOFER/LFE of the audio video amplifier using the sec-
ond CINCH cable.
e n g l i s h
Caution
Before making
any connection
turns off your
amplifier and
unplugs it from
the outlet.
Not doing so may
result in damage
to your system.
Caution
It is imperative
before any
connection
to respect the
setting in phase
by connecting
the ter/red
of the amplifier to
the te/red
of the speakers.
Proceed then
in the same way for
terminals -/black.
Caution
The use of the
MAX Cabasse
module is essential
to the correct
operation of
Xi SYSTEM
®
;
therefore,
it is necessary
to respect
the following
connection
instructions.
Caution
To avoid any electrical
shock on the 3 left pairs
of cable of the MAX
insulates them
from each other.
Caution
To avoid any
electrical shock
on the 2 left pairs
of cables of the MAX
insulates them
from each other.
