background image

e n g l i s h

Check all the connections carried out on the speakers, the

subwoofer and the amplifier. Ensure that each speaker is con-

nected according to its position

in the room. Check that all the

speakers are well in phase (+/red

in +/red and -/black in -/black).

Once this checking made you can

connect your amplifier and the

subwoofer to the sector.

ADJUSTING

Subwoofer adjusting

Take care of positioning the sector switch 115V/230V on the

right position according to your country.

The switch ON/OFF (located on the back) of the subwoofer has

3 positions:

ON

AUTO Automatic, the system is put automatically on ON or

OFF according to the presence of signal coming from

the amplifier. Put the switch ON/OFF on AUTO or ON

position.

OFF

CROSSOVER

0

(located on the front): adjust the poten-

tiometer on a “3 AM” position.

VOLUME

(located on the front): the adjustment of the volume

will depend upon room positioning, type of amplifiers… With

Xi SYSTEM

®

the average position is on a “12 AM” position. For

an optimum adjustment of the volume, we advise you to car-

ry out it starting from a stereo source (CD). Then use the “test

tone” of your audio amplifier video 5.1 to adjust the level of

channel SUBWOOFER/LFE.

PHASE

(located on the front): usually it is necessary to posi-

tion the potentiometer on 0°, however 2 positions can be

used 0° and 180 °.

1- Adjust the potentiometer on 0° when the subwoofer and the

speakers are positioned at the same distance of the listen-

ing area.

2- Adjust the potentiometer on 180° when the subwoofer is

positioned 5 ft (1.5m) ahead or behind the speakers.

Setting your audio video amplifier

-

The table below shows the adjustments to make.

Speakers

Amplifier 
adjusting

Front left

LARGE

Front right

LARGE

Centre LARGE

Surround Left

LARGE

Surround Right

LARGE

Subwoofer/LFE

ON

Xi SYSTEM

®

Position

Installation

Ways

Drivers

Sensivity

Cross-Over

Phase

Frequency

Tweeter

Medium*

1W/1m

points

response

(cm)

(cm)

(dB)

(Hz)

(Hz)

Xi Speaker

floorstanding

2/5/6/7

2

SOFT DOME

4 in (10 cm)

92.5

3,500

-

150-20,000

column

channel system

1 in (2.6 cm)

x 2

Xi Speaker

bookshelf

2/5/6/7

2

SOFT DOME

4 in (10 cm)

92.5

3,500

-

150-20,000

bookshelf

or stand

channel system

1 in (2.6 cm)

x 2

Xi Speaker

on/under TV

2/5/6/7

2

SOFT DOME

4 in (10 cm)

92.5

3,500

-

150-20,000

centre/on wall

on wall

channel system

1 in (2.6 cm)

x 2

Xi subwoofer

floorstanding

subwoofer

1

-

21

active

adjustable adjustable

30-170

0°-180°

Set of 2 aluminium stand in option

XI SYSTEM

®

TECHNICAL FEATURES

*P2C diaphragm : Polymer loaded in Calcium Carbonate

Caution

To prevent the risks 

of electric shock 

takes care to completely

insert plugs 

of sector cords.

Summary of Contents for XI SYSTEM -

















Reviews: