INSTALL ATION
The components of your system:
■
2, 3, 5, 6 or 7 Baltic Evolution
■
1 Cabasse Cabasse active subwoofer
Baltic Evolution on wall version
The wall bracket of Baltic Evolution on wall has been desi-
gned to allow a convenient positioning of the TC23 driver in
many dire/- 39° in any direction, and to give the pos-
sibility to hide the speaker cable in the wall with no apparent
bolts or screws
1
. Please follow step by step the instructions
as shown in
2
.
Baltic Evolution on base version
Baltic Evolution on base is delivered with a little cradle, pose
the sphere Baltic Evolution on this cradle. This system enables
you to put Baltic Evolution on a bookshelf.
Floor standing Baltic Evolution
The stand version is supplied with adjustable spikes for a per-
fect stability even if the floor is not horizontal.
Positioning of Baltic Evolution
Positioning of the speakers: if possible, try to match with the
3
drawing, with the Cabasse subwoofer in the front area
facing the listening spot. Its position against a wall reinforces
the extreme low register and limits the reflections between 80
and 200 Hz. However to obtain the best result, it is always
necessary to carry out tests according to the acoustics of the
room.
CONNECTIONS
It is imperative to respect the correct phasing when connecting:
+ to + (red) and - to - (black).
Configuration 2.1
4
■
2 Baltic Evo 1 Cabasse subwoofer
Connect with speaker cables the amplifier outputs to the ter-
minals HIGH LEVEL INPUT L (left) and HIGH LEVEL INPUT R
(right) of the Cabasse subwoofer and connect the outputs
HIGH LEVEL OUTPUT L (left) and HIGH LEVEL OUTPUT R
(right) of the Cabasse subwoofer to the Baltic Evolution inputs
5
.
Configuration 5.1
6
■
5 Baltic Evo 1 Cabasse subwoofer or
■
2 main sp 3 Baltic Evo 1 Cabasse
subwoofer
When the processor of your audio video amplifier includes a
2.1 set-up (subwoofer for stereo reproduction), connect each
speaker output of the 5.1 amplifier directly to the matching Bal-
tic Evolution (front right, front left, centre, surround...). Connect
the subwoofer CINCH RCA output of the amplifier to one of
the CINCH RCA LINE IN terminals of the Cabasse subwoofer
7
.
Then adjust the set-up menu of your audio video amplifier:
5 Baltic Evo 1 Cabasse subwoofer
2 main sp 3 Baltic Evo 1 Cabas-
se subwoofer
*Adjustment in SMALL or LARGE, according to their ability in
reproducing deep low frequencies.
Some audio video amplifiers require these information:
If your audio video has an adjustable crossover frequency, the
adjustment will be 80 Hz.
SUBWOOFER
ONLY
SUBWOOFER stereo
YES
FRONT
SMALL ou LARGE*
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER / LFE
YES
FRONT
SMALL
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER / LFE
YES
e
n
g
l
i
s
h
With Baltic Evolution, Cabasse proposes a Hi Fi / audio video system with the Cabasse SCS
technlogy (Spatially Coherent System). Baltic Evolution comes from the high end ARTIS
range, with a specific 3-ways tri-axial driver, the TC23. With these 3-way speakers combined
with a Cabasse Cabasse active subwoofer, you can get a very high quality system, either in a 2.1
configuration (standard stereo) or in a 5.1 configuration (5 channels system) or 6.1 or 7.1...
Depending on your system - stereo or multi-channel - the size of the listening room,
your taste and demand, your Artis dealer will guide you in selecting your Cabasse subwoofer(s):
Santorin 25, Santorin 30, Thor II, Largo or Saturn 55.
Cab notice Baltic Evo-6 31/08/06 11:49 Page 8
