14
After the deck plate has been securely fixed to the deck you should now remove
the four “grub bolts” that are installed in the four spigot-bolt holes. (The
purpose of these grub bolts is to keep dirt out of the threaded holes when not in
use). These grub bolts is to keep dirt out of the threaded holes when not in use).
Attach the spigot to the deck plate using the supplied hardware and tighten
down with the supplied allen key. Lift the Axis umbrella onto the spigot on top of
the base plate. Now you can carefully open your umbrella for the first time.
BASE OPTIONS
STACKING GALVANIZED STEEL PLATES:
Your umbrella comes with a spigot. Once you have properly stacked your G-
Plates with your threaded holes lined up on the bottom of the two above plates,
bolt your spigot and thread it through the bottom plate.
IMPORTANT: Be sure to have read “GUIDELINES TO CONSIDER WHEN
INSTALLING” (Pages 5-6) before beginning the installation process.
Summary of Contents for AXIS CANTILEVER
