9
2.2 Preparing a P Version Printer
!
Attention!
In order to operate a PSQ cutter with a P version SQUIX printer,
the locking system (3) and the roller (2) must be removed from the
printer.
1
2
3
4 5
Swing down the locking system (3)
Loosen screw (4).
Remove the locking system (3) from the axle (1) .
!
Warning!
Do not reach between the roller (2) and the axle (1).
The axle (1) is tensioned by spring force and can turn.
Unscrew the roller bearing (5)..
Pull out the roller (2).
