15
5.10
Select the cut mode
2
1
Fig. 9
Cut mode
Mode
(1)
- Press the foot switch and the carriage only moves in one direction between P1 and P2.
- Press the foot switch again and the carriage moves in the other direction between P1 and P2.
There are only two cutting depths adjustable, as in both directions of the carriage movement can be cut.
„5.5 Recommendation for cutting Circular Blade 60“
1. Mode
(2)
- Press footswitch and carriage moves in one direction between P1 and P2
and then moves back to position P1.
There are three cutting depths adjustable, because only in one direction of the carriage movement is cut,
from P1 to P2
„5.5 Recommendation for cutting Circular Blade 60“
5 Startup
