Pic. 24
Pic. 26
Pic. 27
CLEANING OPERATION
Pic. 25
Place fingers under the front lower part
of the bowl, near the tap, and push
upwards until legs pop out.
Turn power off.
Drain product. Fill bowl with tepid water, and wait 15 minutes (see Pict.24 & 25).
To continue cleaning operation empty the bowl again.
Place fingers behind the bowl legs and
pull the bowl onwards slowly until it has
been completely removed.
For an easy removal of the bowl. Please follow instructions shown in Pictures
26 & 27.
ATTENTION: Place all the components in a safe place in order to be sure they are not lost.
NOTE: Do not use too hot water to clean the plastic components .
Clean the components with dish-washing soap and tepid water. Never use abrasive cleaners.
6
