Pic. 47a
Pic. 46
REASSEMBLY OF THE BOWL
ATTENTION . Before reassemble of the bowl be sure that the bowl gasket is still
in its position. If necessary fix again the bowl gasket without removing the
spiral blade.
Insert the bowl making sure that the back hole of the bowl is fixed perfectly in the bowl
gasket site. It is important that the bowl hole corresponds perfectly to the gasket
shape. To obtain this easily lift slighly the back part of the bowl when insering it.
Press the bowl deeply (see Pict. 46 and 47).
Once the bowl is inserted deeply press with the fingers on the legs and push
downwards until you hear the clap (See Pict 47 and 47a).
If this operation can seem difficult you may also press one leg first with both your
hands and then the other (see Pic. 48).
Pic. 47
Pic. 48
11
