10
10
11
2
Installation
2.3 Connecting the Device
2
3
4
5
1
1 Power switch
2 USB master ports for
keyboard, scanner, memory
stick or service key
3 USB high-speed slave port
4 Ethernet 10/100 Base-T
5 Power connection jack
Fig. 4
Connections
2.3.1 Connecting to the Power Supply
The printer is equipped with a wide area power unit for a supply voltage of
100 V to 240 V.
1. Check that the device is switched off.
2. Plug the power cable into the power connection jack (5).
3. Plug the power cable into a grounded socket.
2.3.2 Connecting to a Computer or Computer Network
!
Attention!
Inadequate or no grounding can cause malfunctions during
operations.
Ensure that all computers and cables connected to the label printer
are grounded.
Connect the label printer to a computer or network by a suitable cable.
For details of the configuration of the individual interfaces
Configuration
Manual.