48
cab Produkttechnik GmbH & Co KG
25
17 13 18
22
23 24
21
20
19
Fig. 7g Loading Labels from Roll in Peel-off mode
13. For peel-off mode swing the locking system (
21
) away from the rewind
assist roller (
23
).
14. Remove all labels from the media strip hangig out of the printer. Then,
slide the strip (
25
) around the dispense plate (
19
) to the internal rewind
hub (
13
) as shown in figure 7g. Slide the strip under the clamps (
17
) that
are located on the internal rewind hub (
13
). Hold the internal rewind hub
(
13
) and rotate the nut (
18
) counter-clockwise until it is tight. The media
strip will now be fastened to the internal rewind hub (
13
). Rotate the
internal rewind hub (
13
) counter-clockwise to tighten the media strip.
15. Loosen the screw (
22
) using the Allen key (
24
).
Align the locking system (
21
) including the pinch roller (
20
) by sliding it
sidewards. The alignment is correct if the pinch roller (
20
) is placed in the
middle of the label strip.
16. Swing the locking system (
21
) to the rewind axle (
23
) and tighten the
screw (
22
).
17. For further informationen about operating in the peel-off mode see
appendix A.
7. Media Loading
Summary of Contents for A4
