E-7
cab Produkttechnik GmbH & Co KG
10
11
1
12
13
4
Appendix E - Replacing Assembly Units
Fig. E-7 Changing Print Roller and Rewind Assist Roller (II)
5. Remove the print roller (
1
) or the rewind assist roller from the respective
shafts (
11, 12
).
CAUTION !
Before assembling the new roller check if the keys (10, 13) are placed
correctly in the shafts (11,12) !
6. Slide the new print roller or rewind assist roller onto the appropriate shaft.
Make sure the groove in the axle of the roller (
1, 4
) is aligned to the key
(
10, 13
) on the shaft (
11, 12
).
7. Reinstall the plate (
9
) and printhead support (
6
).
8. Tighten the screws (
7
)
a
screw first, then the
b
screw and then the
c
screw.
9. Reassemble the dispense plate (
2
).
Summary of Contents for A3
