17
Safety instructions
CAUTION !
- Read the operating instructions before starting the cablift!
- Use the cablift only according to regulations!
- Use the cablift only on smooth and even floors!
- Always wear industrial safety shoes while using the cablift!
- Do not use the cablift to lift persons!
- Be careful when crossing bumps like thresholds, tubes
and cables!
- Always activate the holding brake during loading and unloading!
- Pay attention that the bearing pressure is free of defects and
properly fixed on the axis!
- Make sure that the size and the form of the loaded product
corresponds to the used load suspension device!
Attend in addition the dimension of the load retainer!
- Do not exceed the maximal lifting capacity of the load
retainer!
- Make sure that the weight of the loaded product and the weight
of the load suspension device do not exceed the maximal carrying
capacity of the cablift!
- Do not enter the area under the lifted load and pay attention to any
person entering this area!
- Charge the accumulator only if the cablift is rested!
- Do not open the machine during charging!
- Do not clean the cablift with water sprayers or something similar!
The cablift meets the requirements of the degree of protection IP 41
(protection of electrical devices against wetness).
