CA RING TOSS, Standard Operating Manual

Page: 19 / 46

Coastal Amusements Inc. | Ring Toss
19
4. There are two screws on either side of the camera mount. Loosen the screws as little as
possible so that the angle of the mount can be adjusted and stay in place once you let
go of the mount.
5. Once you have the camera aligned as best as possible, tighten the screws and then
press the MENU button to recalibrate the camera.
After pressing the Menu button to recalibrate the camera, the following will happen:
1. The game will now attempt to calibrate the camera by first lighting all of the rows of
seven bottles and taking a picture.
2. Then the rows of six bottles will light up and a picture will be taken.
3. Finally, all the bottles will be lit up in their respective row colors and a final calibration
picture will be taken.
If the game still does not calibrate successfully, press the ATTENDANT button and the software
will use the factory default calibration image which will allow the game to function.
This can be used if, for example, some bottles are currently not lighting up or the location’s
lighting is interfering with the calibration.
If you have any questions or comments, please our service department at +1 732 905 6662.
We are open Monday through Friday 09:00 AM – 16:30 PM EST (USA).