C2R Colibri 5 30-001, User Manual

Page: 69 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
69
Rev. C
Telepen
Default
Telepen Enabled
Telepen Output
Using AIM Telepen Output, the imager reads symbols with start/stop pattern 1 and decodes them
as standard full ASCII (start/stop pattern 1). When Original Telepen Output is selected, the
imager reads symbols with start/stop pattern 1 and decodes them as compressed numeric with
optional full ASCII (start/stop pattern 2). Default = AIM Telepen Output.
Telepen Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description
(page 58) for additional information. Minimum and Maximum lengths = 1-60. Minimum Default =
1, Maximum Default = 60.