51
CONNECTING TO A PC
C Pen can be connected to a PC by Infrared (IR) Commu-
nication. To enable this communication certain hardware
and software must be installed on your PC and config-
ured properly. The following are required:
1. IR port. Portable computers often have a built-in IR
port. Refer to your computer’s manual to find out
whether your notebook is equipped with an IR port
and if so, where it is located. Most desktop computers
do not have a built-in IR port. In this case you must
use an external IR adapter. Refer to your retailer if you
don’t have an IR adapter.
2. Infrared drivers for Windows 95 (included on the C Pen
Software CD). If you use Windows 98 or Windows NT,
please read the ReadMe file on the C Pen Software CD.
3. C Pen Windows Software. This software is installed
using the C Pen Software CD.
Installing software
Both the Infrared drivers and the C Pen Windows
Software are installed when you run the installation
program on the CD-ROM. Infrared drivers are possibly
already installed on your computer. The installation
program automatically detects if infrared drivers are
installed or not.
Infrared hardware on notebooks can be configured in
many different ways. Please refer to the ReadMe file on
the C Pen Software CD before installing infrared software
on a notebook. If you have questions and the ReadMe
Summary of Contents for C-Pen
Page 1: ...USER S MANUAL English...
Page 26: ...26 C Pen Pp Qq Rr Ss Tt Uu Vv Xx Yy Zz 1 2 3 4 5 6 7 8 9 0...
Page 28: ...28 C Pen _...