C-Tech SYE-2000BS, Product Manual

Page: 5 / 11

- 3 -
8- for70.7 mm cubic compression specimen
Save
The data saved will not be lost when the power supply is cut off. The max memory is 500 unit
data from No. 01-9999 automatically. Also, the number can be input manually. Care must be
taken that the last test data will be saved for the same number. If the saved data is over 500,
the first data in the memory will be deleted
IV. Installation and operation
Installation and wiring
The pressure controller should be assembled and fixed on the compression testing machine. The
power input and output, socket of transducer etc are arranged on the rear of the controller. What the
operator to do is insert the plugs into the sockets matched. The RS232C interface is used for the
communication with the computer if necessary.
Setting of the clock
The time can be set as follows if necessary. Date and time format is (dd-mm-yyyy hh:mm:ss)
① . Press “Func” key continuously until the clock indicating lamp flashed, press “Enter” key for
setting the data and time.
② . “XX-XX” will be displayed on the Force Value window and “-20XX” will be displayed on the Loading
Rate window. Press the numbers to set the date and time.
③ . After the date setting completed, the time setting is followed when “XX-XX-“ is displayed on the
Force Value window and “XX” is displayed on the Loading Rate window.
④ . The clock indicating lamp will be off after the completion of the setting of the date and time.
Testing procedures
① . Place the specimen on the testing machine. Make the upper platen downward closing to the
specimen by turning the lead screw. Care must be taken that the upper platen should not be