- 16 -
[Set the y-direction range]: Set the y range of the coordinate axis of the test interface.
Save parameters interface
In the system settings, click the "Save parameters" button to enter the [Save parameters] interface,
as shown in Figure 5-6. The description of each parameter and button is as follows.
[Backup current parameters]: After clicking this button, the currently set parameters can be backed
up, and the parameters backed up last time will be overwritten; when necessary, the backup
parameters can be used to restore the device;
[Restore backup parameters]: After clicking this button, the previously backed up parameters will be
restored and the currently set parameters will be overwritten. After restoring the backup parameters,
click "parameter download", "pressure correction table download" and "displacement calibration
table download" to make the backup parameters take effect.
Figure 5-6 Save parameters
Signal testing interface
In the system settings, click the "Signal Testing" button to enter the [Signal Testing] interface, as
shown in Figure 5-7. In this interface, you can monitor the voltage, load of the pressure sensor, the
voltage of the displacement sensor, the displacement, and the status code, as well as the various
