C-Tech HTHY-0709, Product Manual

Page: 16 / 26

- 14 -
Figure 5-4 Marshall stability test interface
System settings
In the [Test] interface shown in Figure 5-4, click the "System Settings" button to enter [System
Settings]. "System Settings" includes "Parameter Settings", "Parameter Save", "Signal Test", "Status
Code Description" and other interfaces.
Click the green or red button at the top of the interface to select the operation to be performed:
(1) Click the "Save Parameters" button to enter the [Save Parameters] interface to save and restore
parameters;
(2) Click the "Signal Testing" button to enter the [Signal Testing] interface, which is used for engineers
to debug and can view various parameters and instrument tests;
(3) Click the "Parameter Settings" button to enter the [Parameter Settings] interface to set various
parameters;
(4) Click the "Status Code Description" button to enter the [Status Code Description] interface to view
the equipment fault code and troubleshooting methods;