- 6 -
98% compaction with 10% moisture
92% compaction with 5% moisture
92% compaction with 7.5% moisture
92% compaction with 10% moisture
A minimum of three (3) Test Spots (or more specifically, Soil Tests) are required for a valid Soil Model.
VII. To create a Soil Model
1. Screw on the connector for the Soil Sensor Unit to the left side panel receptacle. Be sure that the
connector is tight so as to prevent the entry of dirt or moisture.
2. Screw on the Temperature Probe connector to the receptacle on soil sensor.
3. Press the round button on the left side of the EDG unit:
4
、
From the EDG Main menu, enter Model List menu by pressing Soil Models.
