ADDRESSABLE OVERDOOR LIGHTS & ADDRESSABLE SOUNDERS
Addressable overdoor lights are designed to act as area
indicators or to provide ‘follow me’ lights at the ends of
corridors, etc. They have built-in sounders and are
similar in appearance to standard overdoor lights.
Because they are addressable, they can be instructed to
light when certain groups of call points are calling.
Addressable sounders can be used to increase sound
levels in long corridors, outside communal areas, etc.
QT606A ................ Quantec Addressable Overdoor Light
QT688 .................. Quantec Addressable Sounder
QUANTEC CONTROLLER
The Quantec Controller supplies power to
and controls the Quantec system. It
constantly monitors all network devices
and indicates the exact ID number of any
faulty devices. Connections are provided
at the controller for all network wiring,
optional stand-by batteries and various
system ancillaries including printing,
paging and programming equipment. It is
supplied in a 410 x 250 x 80mm metal back
box and can be flush or semi-flush
mounted using the AFP385 mounting bezel.
Programming is usually carried out via a laptop PC running Quantec’s upload/download PC
software (part no. QT707). The buttons on the controller’s front can also be used for programming
but as this is very time consuming we recommend it for updating existing site data only.
In addition to the controller’s library of 45 pre-set place names, up to 40 custom place
names (of up to 11 characters) can be programmed into the Controller for assigning to
network devices. The library of 45 pre-set names consists of the following:-
Annex; Area; Bathroom; Bedroom; Conservatory; Corridor; Dining room; Disabled WC; Display;
Door; Doorbell; Drugs Cab; Entrance; ESMI Unit; Exit; Fire exit; Flat; Floor; Gents WC; Hair-
dresser; Kitchen; Ladies WC; Laundry; Lift; Lounge; Meeting RM; OD Light; Phone; Quiet Room;
Reception; Room; Shower; Sluice; Special; Staff Room; Toilet; Treat Room; TV Room; Ward; Zone
Up to four alphanumeric characters can be tagged onto the end of all pre-set and custom
place names, a typical example being: “DISABLED WC EW01”.
The Controller’s 40x2 character display is effectively split into two parts, the left side
showing the time, date and call information; the right side continually showing the overall
status of the system and providing notification of any faults.
To assist the engineer at system setup and during routine maintenance, a wide range of
installation and fault finding functions are also provided at the Controller. These are
described in greater detail in the Quantec Programming Manual (doc. no. DNU6012001)
QT601-2 ............... Quantec Controller
AFP385 ................. Bezel for QT601-2 Quantec Controller
QT707 .................. Quantec Programming Kit (incl. upload/download software & lead)
QT600P ................ Quantec Printer Kit (incl.pre-tested printer, wall socket and lead)
DP874QA ............. 400m Alphanumeric paging transmitter (incl. transmitter,wall socket & lead)
DP877QA ............. 32 character alphanumeric display pager, group A.
Please refer to our Quantec price list for additional alphanumeric paging equipment such as
extension aerials, mounting brackets and low loss cable.
V
Q
uantec
V
V
A
1
2
3
E
C
ontroller
✓
✕
Approved Document No: DNSQ100101 Rev 6 • Page 8 of 16
