C.T.M. HS-850 Instruction Booklet Download Page 5

Instruction Booklet

8-Series

2.Medium-range mobile transceivers, such as those used in police cars, fire trucks,
   ambulances, and taxis.  These usually have the antenna mounted on the outside of the
   vehicle; and
3.Long-range transmitters and transceivers such as commercial broadcast transmitters
   (radio and TV broadcast antenna towers) and amateur (HAM) radios

Other types of hand-held devices, such as cordless phones, laptop

computers, AM/FM radios, TV sets, CD players, and cassette players,

and small appliances, such as electric shavers and hair dryers, so far as.

we know, are not likely to cause EMI problems to your motorized scooter.

ELECTROMAGNETIC INTERFERENCE
AND WARNINGS 

3

CAUTION: It is very important that you read this information regarding the possible

                  effects of Electromagnetic Interference on your motorized scooter.

Powered wheelchairs and motorized scooters may be susceptible to electromagnetic 
interference (EMI), which is interfering electromagnetic energy (EM) emitted from sources
such a radio stations, TV stations, amateur radio (HAM) transmitters, two-way radios, and
cellular phones.  The interference (from radio wave sources) can cause the motorized
scooter to release its brakes, move by itself, or move in unintended directions.  It can also
permanently damage the motorized scooter control system.  The intensity of the interfering
EM energy can be measured in volts per meter (V/m).  Each motorized scooter can resist
EMI up to a certain intensity.  This is called its "immunity level." The higher the immunity
level, the greater the protection.  At this time, current technology is capable of achieving
at least a 20 V/m immunity level, which would provide useful protection from the more
common sources of radiated EMI.  The immunity level of this motorized scooter model is
not known.
There are a number of sources of relatively intense electromagnetic fields in the everyday 
environment.  Some of these sources are obvious and easy to avoid. Others are not
apparent and exposure is unavoidable.  However, we believe that by following the warnings
listed below, your risk to EMI will be minimized.

Some cellular telephones and similar devices transmit signals while

they are ON, even when not being used

The sources of radiated EMI can be broadly classified into three types :

1.Hand-held portable transceivers (transmitters-receivers) with the antenna mounted
   directly on the transmitting unit.  Examples include: citizens band (CB) radios, "walkie
   talkie," security, fire, and police transceivers, cellular telephones, and other personal
   communication devices

Summary of Contents for HS-850


















Reviews: