Instruction Booklet
7-Series
11
ASSEMBLING YOUR SCOOTER
To assemble the scooter, you can repeat the disassembly directions in reverse.
Abbreviated directions are given below. Refer to the Figures on pages 11 - 12 to
locate the parts.
1.Use the tiller angle adjustment lever to move the steering column up out of the way.
2.Place the front basket
3.Tilting the rear end to a horizontal position, insert the scooter frame tube of the front
end into the rear section first, making sure that the locking pins are removed.
4.Slide the two sections of the unit together until the front half reaches its limits.
5.Insert the two locking pins into their corresponding holes. Both locking pins must be
fully inserted whenever the scooter is assembled.
6.Place batteries, one on each side of the seat post, and use Vel-cro to fix the position.
7.Attach the battery power plugs.
8.Attach the wire connect.
9.Place rear hood, battery cover and free-wheeling knob.
10.Loosen Seat Rotation Lever counterclockwise. Place seat on seat post. Tighten Lever
again by turning clockwise. Lock Seat Control Lever on bottom of seat before sitting
down.
