User Manual
HS-2750
1.Pull the security latch (under the seat) open (Fig. 16-1) to pull the battery box out (Fig. 16).
To reinstall, level the battery box with the
slide rails and pull the security latch open
(Fig 16-1), then push the box inwards until
a "click" sound is heard to lock it in place.
※
There are two charging ports, one is on battery box, and the other is on remote module.
2.Take the originally equipped charger (A) to connect the charger output cable (E) to the
charging port (F) of the battery box. Connect the AC power cord (B) to a standard wall
power outlet (C). Check if the LED(orange) light turns on (in charging).
LED Light indicator (D)
The LED(red) light will turn on when power on. The LED(orange) light will turn on when
the battery is in charging. When the battery is full charged, the LED light turns green.
12
5-2 CHARGING OPERATION
1.Plug the charger converter connector (I) into the joystick controller charging port (G).
2.Connect the other connector (J) into the charger output cable (E).
3.Connect the AC power cord (B) to a standard wall power outlet (C). Check if the LED
(orange) light turns on (in charging).
Figure 16
Figure 17
Figure 18
16-1
16-2
• Watch out for pinching.
• The detachable battery box must be
pushed in completely and made sure
it can't be loosened to lock in place.
(E)
(A)
(B)
(D)
(C)
(F)
(G)
(I)
(J)
The time needed to a full charge will be around 7 hours. Disconnect the AC power cord
(B) right after charging. The charger LED light indicator (D) should light up green when
fully charged. If not, it is a sign of charger (A) or battery malfunction. Please contact your
authorized dealer. Do not attempt to repair by yourself.
Battery box charging port
Remote charging port
(E)
(A)
(B)
(D)
(C)
