User's Manual
HS-1000
12
INSTALLATION OF BATTERIES
Please follow instructions below to install batteries.
1.Refer to page 11 on "DISASSEMBLING / RE-ASSEMBLING YOUR POWER CHAIR"
before installing batteries.
2.Make sure free-wheeling lever is set to "D" to engage motors.
3.Once the shrouds are removed, fasten Velcro straps that will hold batteries in place.
(See Fig. 17)
4.Locate nuts and bolts that fasten battery cables to battery and then put them aside.
5.Install new batteries, facing each other.
6.Locate one side of cables and make sure wire, marked (+), is connected to the closest
positive (red) battery terminal (See Fig. 18). Next, secure wires with nuts and bolts
provided (See Fig. 19). And then use a 10 mm wrench to tighten hardware (See Fig. 20).
7.On the same cable, connect wire, marked (-), to the closest negative (black) battery
terminal on another battery (See Fig. 18). Next, secure wires with nuts and bolts provided
(See Fig. 19). And then use a 10 mm wrench to tighten hardware (See Fig. 20).
Warning:
DO NOT attach one set of cables to the SAME battery, as it will not function
correctly.
Figure 17
Figure 17
Figure 18
Figure 18
Figure 19
Figure 19
battery
red
red
black
black
battery
