C-SCOPE M-SCAN, User Manual

Page: 9 / 20

9
Volume
The volume can be adjusted
using the
Volume and
Volume V buttons.
There are eight possible
volume settings,
V1 is the quietest
and V8 is the loudest.
The display will momentarily
indicate the new setting (eg V5)
in the bottom centre.
Audio Indication
When no ferrous metal is present, the sound heard
will be a low frequency tone. When the M-Scan
is brought near to ferromagnetic material, such as an iron cover,
the frequency of the audio tone will increase.
There is a standard headphone 3.5mm jack socket under
the cover on the base of the M-Scan. The audio from the load
speaker is not cut out when headphones are connected.
Care should be exercised when choosing headphones
as some may interfere with the operation of the M-Scan.
Only use headphones recommended by C.SCOPE.
Basic Operation and Description
M-SCAN
V