11 / 24
9.
Assembly of the structure
interna
The internal structure of the swimming pool is made up of internal panels, corner pillars, ribs and finally
the buttresses, as listed below:
The main elements that make up the internal structure of the Mediterranean are the 20/10 mm thick
galvanized steel panels. These elements, 1500 mm long and 1225 mm high, can have holes in which to
accommodate the pool accessories, such as intake vents, skimmers, lights and possibly swimming
against the current model Bellow Jet (optional). The panels have holes on both the lateral and upper and
lower wings to allow the connection between the various elements.
The panels with the predisposition for accessories such as skimmer, lighthouse, intake vents will be
installed on the short sides of the pool. The panels with the predispositions for skimmer and lighthouse
from the side where the technical compartment will be made. Those without holes (cod.art.4030020)
will be installed in the end parts of the long sides, in contact with the corner posts (cod.art.4030027).
Finally, those with double reinforcement (code art. 4030171) will be positioned in the central parts of the
same sides.
06/12/2019
Ver.00
INTERNAL STRUCTURE
Internal Code
Quantity
Component
4030020
4
Inside panel 1500
4030171
4
Inside panel double reinforcement 1500
4030021
1
Skimmer Panel 1500
4030022
1
Right vent panel 1500
4030023
1
Left vent panel 1500
4030024
1
Panel light 1500
4030025
optional
Bellow jet Panel 1500
4030026
16
Reinforcement Panel 1500
4030027
4
Pillar corner
4030051
2
Centring top corner
4030052
2
Centring lower corner
4030096
2
Centring upper technical compartement
4030097
2
Centring lower technical compartement
MEDITERRANEA
