SIGHT MODELS:
Voice
- 540-347-4683
Fax
- 540-347-4684
web
- www.cmore.com
CMS-IB-STS2-061314
PLEASE read instructions before operating
or installing this sighting system.
PACKAGE CONTENTS:
1 - STS2 Sight
2 - Direct Mounting Screws
1 - Cover
1 - Wrench - Mounting Screws
1 - Instruction Manual
1 - Adjustment Wrench
(MOUNTS SOLD SEPARATELY)
Instruction Manual
© C-MORE Systems 1993-2014
Congratulations! You are now the owner of the most
advanced reflex sighting system available. You have dis-
played excellent judgement in your purchase, and you will
be rewarded with unparalleled performance. Use it with
pride, but please familiarize yourself with the system first.
STS2B-3
STS2B-6
STS2
DESCRIPTION OF MAJOR COMPONENTS
INTENSITY SWITCH
Used to set the intensity (Brightness) of the dot or turn the dot off. The STS2 provides 10 visible brightness settings.
Turning ON:
Pressing either the up or down button will turn the dot on to the previously set intesity.
Adjusting:
Pressing the UP button will adjust the intensity of the dot UP incrementally to position 10. Pressing the
DOWN button will adjust the intensity of the dot DOWN incrementally to position 1.
Turning OFF:
Holding either button for 3 seconds will turn the dot off.
Auto OFF:
The dot will turn OFF automatically after 8 hours of inactivity.
WINDAGE ADJUSTMENT SCREW
Used when zeroing weapon. Turning the windage adjustment screw clockwise moves the point of impact right.
Turning the windage adjustment screw counter-clockwise moves the point of impact left. (1 click = 1moa)
LOCK SCREW
Used to lock the elevation and windage adjustment mechanism once the sight has been zeroed to the weapon.
Turning the lock screw counter-clockwise one and a half turns will loosen the screw and allow elevation and
windage adjustments to be made. Turning the lock screw clockwise until firmly snug will lock the elevation and
windage adjustments in their current location.
ELEVATION ADJUSTMENT SCREW
Used when zeroing weapon. Turning the elevation adjustment screw clockwise moves the point of impact down.
Turning the elevation adjustment screw counter-clockwise moves the point of impact up. (1 click = 1moa)
INSTALLATION INSTRUCTIONS
The STS2 can be installed using a C-MORE STS mount or mounting kit, or it can be installed directly to an after-
market or custom mount using the screws provided.
C-MORE STS mount or mounting kit installation instructions:
Follow the instructions provided with the mount or mounting kit.
Direct Mounting installation instructions:
Follow the instructions provided with the mount or mounting kit, or utilize the direct mounting screws provided.
NOTE: Do Not Overtighten Mounting Screws! If the battery tray cannot be removed / installed freely, then the
mounting screws are too tight causing the battery tray to bind.
Mounting Maintenance:
Periodically check the sight to ensure that it is firmly mounted and there is no movement. If movement is detected,
or mounting screws have loosened, remove the mounting screws and re-apply loctite prior to re-installation.
Firing a weapon with a loose sight can cause damage to the weapon, the sight, and you!
STOP!! Make sure your firearm is unloaded and the magazine and ammunition has been
removed before proceeding!
