Table of contents
3.1 Location
3.2 Extending and Retracting the Boom
3.3 Fitting the line to the level-wind
3.4 The Line-Limit Tube
Removing and replacing the line-limit tube
3.5 Power Supply
3.6 Network
3.7 Integration into the Survey Network
3.8 Interfacing with Valeport profilers
3.8.1 Configuring Valeport Connect
3.9 Interfacing with AML profilers
3.9.1 Configuring AML Sailfish
3.9.2 Configuring Vigo Depth Relay
4.1 Powering the Winch
4.2 Using the IN and OUT Controls
4.3 Accessing and Navigating the Control Software
4.4 Configuring and Attaching the Profiler
4.5 Setting the Data Transfer Position
5.1 Selecting a different profiler
5.2 Changing the Profiling Mode
5.3 Changing the Recovery Speed
5.4 Setting the Power Budget
5.5 Acquiring a Profile
Repeat Cast on New SWiFT Message
Repeat Cast after ‘x’ minute(s)
Repeat Cast every ‘x’ meters
7. Action if the Profiler becomes caught
2