C-Max CMM-9304-V2.1 Manual Download Page 11 | Manualshive

Page: 11 / 11

C-Max CMM-9304-V2.1 Manual Download Page 11

CMM-9304-V2.1
Bluetooth 4.2 / 5.0 compatible module

SPEC No.

CMM-9304-V2.1

BLE module

Revision

2.8

State

2017-11-13

C-MAX printed

2017-11-13

Version

English

Page

11 of 11

C-MAX

Disclaimer of Warranty

Information furnished is believed to be accurate and reliable. However C-MAX assumes no responsibility, neither for the consequences of use
of such information nor for any infringement of patents or other rights of third parties, which may result from its use. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. C-MAX
products are not authorized for use as critical components in life support devices without express written approval of C-MAX.

Note

It is not given warranty that the declared circuits, devices, facilities, components, assembly groups or treatments included herein are free from
legal claims of third parties. The declared data are serving only to description of product. They are not guaranteed properties as defined by
law. The examples are given without obligation and cannot give rise to any liability.

Reprinting this data sheet - or parts of it - is only allowed with a license of the publisher.

C-MAX

reserves the right to make changes on this specification without notice at any time.

C-MAX

Asia Ltd

C-MAX

Technology Ltd (Shenzhen)

Unit 117, 1/F.,

Unit 33H,33/F.,

Liven House,

International Trade Commercial Building,

61-63 King Yip Street,

3005 Nanhu Road,

Kwun Tong, Kowloon, HK SAR

Luohu District, Shenzhen, PR China,

Tel.: +852-2798-5182

Tel: +86-755-25181858

Fax: +852-2798-5379

Fax: +86-755-25181859

e-mail:

[email protected]

email: [email protected]

«
...
9
10
11

Summary of Contents for CMM-9304-V2.1












Reviews:

No comments