background image

13

A2

Temperature 

hysteresis

1-9 ºC

2 ºC

A3

Lock function

0: Half lock

1: Full lock

0

A4

Automatic 

option

0: automatic programs

1: no automatic programs

0

A5

High measured 

temperature 

value

35 ºC-50 ºC

45 ºC

A6

Low measured 

temperature 

value 

5 ºC-10 ºC

5 ºC

A7

Low setting 

temperature 

value 

1 ºC-10 ºC

5 ºC

A8

High setting 

temperature 

value 

30-70 ºC

35 ºC

A9

Descaling 

function

0:descaling function disabled;

1:descaling function enabled;

 Descaling function: when valve is continuously 

closed over 100 hours, it will be opened for 3 

minutes automatically.  

0

AC

Not apply

Not apply

AA

Restore to 

Factory default 

setting

Press rotary key when is displayed.

Cautions on installation and use

1. 

To prevent the programmable thermostat display form a high fluctuation, a special treatment has 

been made to the program. Therefore, it is normal that the thermostat cannot immediately display the 
sudden change of temperature. 

2. 

The programmable thermostat should be installed on 1.5m above the ground. 

3. 

Please take care not to install it to the Wall corner, door / window side, behind the door or in unheated 

areas as exterior walls. Avoid the installation close to hot/cold air duct, radiators, flue or thermal 

pipes. 

4. 

If you have any problem to install the unit, please contact with the manufacturer. 

5. 

The programmable thermostat is an unrepairable product. The user shall not open the internal circuit 
board. 

6. 

Before installing the programmable thermostat, make sure the system is disconnected. The maximum 

voltage of the system shall meet the requirements specified in this manual. (Max. AC voltage: 250V)

Summary of Contents for 410-TC

















Reviews: