IP Camera Network Setup Guide
Phone: 800-252-1910
Int: 708-867-4002
10
of
10
b.
In the message bar at the bottom of the screen, click
Run
. Follow the on-screen instructions to install
WebComponents
. When the following screen opens, click
Finish
.
The Live View screen with the camera video image should appear.
NOTE: Most IP cameras have a Reset button for returning the camera configuration to its factory settings. The reset
button needs to be pressed with the camera disconnected from power. Continue holding the reset button down and plug
the camera back into power and continue to hold the reset button for an additional 30 - 45 seconds.
NOTE: For more details on using the functions of this camera, refer to the instruction manual for the Camera Management
Software (CMS) you are using.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER
INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT US AT [email protected] FOR FURTHER ASSISTANCE.